Stain Wipe - Ascorbic Acid Alternative - Metal Stain RemoverA powerful stain removal powder! STAIN WIPE is an effective alternative to using ascorbic acid. STAIN WIPE can remove metallic and some organic related stains. The strongest, most effective stain remover we've ever offered! Technical Notes: Although STAIN WIPE is highly effective as a stain remover, users will notice difficulty in maintaining a proper chlorine level after use of STAIN WIPE. Users should be prepared to increase the dosage of chlorine (using tablets) for 4-6 weeks to maintain a proper chlorine level. Not recommended to use if pool water is above 83 degrees. Do not superchlorinate chlorine or shock using chlorine (see White Lightnin Shock below) for 8 weeks after using STAIN WIPE. Directions: Apply 2# for pools up to 35,000 gallons, 1# if less than 18,000 gallons. Results should be evident in 24-48 hours. Add algaecide and do not use chlorine based products to shock. If stains are only in limited area, apply STAIN WIPE directly over the stained area with the pump circulation turned off. Follow detailed instructions on label Suggestions to Help with Treatment Success ....
1. Also add PB Stain Remover prior to adding STAIN WIPE. 1 qt of PB SUPER METAL REMOVEwould be adequate for a normal sized pool if also adding STAIN WIPE.
2. Add 1 quart of Poolife Algae Bomb 60 to help protect against algae due to the negative effect STAIN WIPE will have on chlorine for the weeks after its application. Size: 2# bag Helpful information:
Understanding Metal Stains
Removing Metal Stains
Low pH |
